Anchors & fixings · Kenya
Anchors & Fixings supplier in Kenya.
Through bolts, sleeve anchors and chemical anchor systems into Kenya for concrete and masonry fixing on commercial, water and energy work.
- THROUGH BOLTS AND SLEEVE ANCHORS, ZINC AND HDG
- CHEMICAL ANCHOR RESIN WITH STUDS AND SIEVES
- LOAD DATA SUPPLIED WITH THE CONSIGNMENT
Anchors & fixings in Kenya
What actually moves in this market.
Anchor selection in Kenya is driven by what the substrate really is. Nairobi commercial slabs take mechanical through bolts without argument; older masonry and hollow block on refurbishment work needs chemical anchors or nylon fixings instead, and a specifier who assumes otherwise finds out on site.
Energy and transmission buyers order anchors against a bill of quantities with a pull-out requirement attached, so we supply the manufacturer's load data with the consignment rather than leaving the engineer to source it.
Landed into Kenya
Routing, lead time and specification.
Corridor
Sea freight to Mombasa, then road or the standard gauge rail service to the Nairobi inland container depot for up-country distribution along the Northern Corridor.
Lead time
Typically 6–9 weeks door to door on a full container: 2–4 weeks production, 4–5 weeks sea freight, 1–2 weeks clearing and inland delivery.
Duty and conformity
East African Community common external tariff applies to HS 7318 fasteners, plus VAT, railway development levy and import declaration fee. Kenya operates a pre-export verification of conformity scheme, so inspection is arranged at origin rather than at the port.
Coating for Kenyan exposure
Mombasa and the coastal strip need hot-dip galvanised or Class 4 roofing fixings; Nairobi and the highlands run safely on zinc plated and Class 3, but high-altitude UV still demands bonded EPDM washers.
Specification
Anchors & fixings we supply into Kenya.
| Mechanical anchors | Through bolts, sleeve anchors, drop-in anchors, shield anchors |
|---|---|
| Chemical anchors | Polyester, vinylester and pure epoxy resin, 300 ml to 585 ml |
| Stud sizes | M6 to M24 · embedment 40 mm to 300 mm |
| Light fixings | Nylon plugs, frame fixings, hammer fixings, cavity and drywall anchors |
| Finishes | Zinc plated, hot-dip galvanised, stainless 304 and 316 |
| Substrates | Cracked and uncracked concrete, solid and hollow block, brick, stone |
| Packing | Boxed by size, resin in cartons of 10 or 12 with nozzles |
| Documentation | Load data sheets and approvals where the product carries them |
Questions from Kenyan buyers
Anchors & fixings into Kenya — asked and answered.
- Mechanical or chemical anchors for Kenyan refurbishment work?
- Chemical, in most cases. Hollow block and older masonry will not develop the cone strength a through bolt assumes; resin plus a threaded stud transfers load into the substrate instead of splitting it.
- Can you ship anchor resin in a sea container?
- Yes, with the correct dangerous goods declaration and shelf-life dating planned around the sea leg so the resin arrives with useful life left on it.
- Do you provide pull-out figures?
- We supply the manufacturer's published load data with the shipment. Site verification testing remains the contractor's responsibility.
Also into Kenya